TM-9-2330-335-14-P

SEMITRAILER, TACTICAL, BREAKBULK/CONTAINER TRANSPORTER, 22-1/2 TON, RESET M871R, M871A1R AND M871A2R

TECHNICAL MANUAL; FIELD AND SUSTAINMENT MAINTENANCE MANUAL (INCLUDES REPAIR PARTS AND SPECIAL TOOLS LIST)

SEPTEMBER 2008

TM-9-2330-335-14-P - Page 204 of 640

TM 9-2330-335-14&P

0036-2

0036

REMOVAL

00036

1.

Remove four sensor clips (Figure 1, Item 10) from four sensors on inside hub of four inner wheels.

2.

Remove four sensors (Figure 1, Item 9) from inside hub of four inner wheels. Hand-install sensors or lightly push into clip

using a wooden dowel rod.

3.

Disconnect four sensor cables (Figure 1, Item 8) from four sensors (Figure 1, Item 9).

4.

Disconnect four sensor cables (Figure 1, Item 8) from ECU valve.

5.

Disconnect diagnostic tool (Figure 1, Item 1) from power/diagnostic cable (Figure 1, Item 7).

6.

Disconnect power/diagnostic cable (Figure 1, Item 7) from ECU valve, power supply, and mounting bracket

(Figure 1, Item 3), removing four screws (Figure 1, Item 4), eight washers (Figure 1, Item 5), and four locknuts

(Figure 1, Item 6). Discard locknuts.

Figure 1.

ABS Brake Power Connections.

036

END OF TASK

INSTALLATION

00036

1.

Connect diagnostic/power cable (Figure 1, Item 7) to ECU valve, power supply, and mounting bracket (Figure 1,

Item 3) with four screws (Figure 1, Item 4), eight washers (Figure 1, Item 5), and four new locknuts (Figure 1,

Item 6).

2.

Connect diagnostic tool (Figure 1, Item 1) to diagnostic/power cable (Figure 1, Item 7).

3.

Connect four sensor cables (Figure 1, Item 8) to ECU valve.

4.

Connect four sensor cables (Figure 1, Item 8) to four sensors (Figure 1, Item 9).

5.

Install four sensors (Figure 1, Item 9) on inside hubs of the four inner wheels.

6.

Secure four sensors (Figure 1, Item 9) to wheel hubs with sensor clips (Figure 1, Item 10).

447-0065