TM-9-2330-342-10
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; OPERATOR'S MANUAL
SEPTEMBER 2012
TM-9-2330-342-10 - Page 323 of 500
CART HAND WINCH OPERATION AT REAR OF TRAILER - Continued
CAUTION
Ensure cart path is free of debris prior to moving cart. Failure to comply
may result in damage to equipment.
11.
Rotate crank handle (Figure 6, Item 7) clockwise until cart (Figure 6, Item 4) is
positioned at rear of trailer (Figure 6, Item 5).
NOTE
Left side and right side hitch pins and lynch pins are installed the same
way. Left side shown.
12.
Install two hitch pins (Figure 7, Item 1) in cart pivot bracket (Figure 7, Item 4) and cart
bracket (Figure 7, Item 3).
2
3
4
1
1
2
Figure 7.
Cart Hand Winch Operation at Rear of Trailer.
13.
Install two lynch pins (Figure 7, Item 2) in hitch pins (Figure 7, Item 1).
14.
Repeat Steps (12) and (13) for right side cart pivot bracket.
15.
Remove strap (Figure 8, Item 3) from cart (Figure 8, Item 1).
TM 9-2330-342-10
0028
0028-7
Back to Top
