TM-9-2330-342-10
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; OPERATOR'S MANUAL
SEPTEMBER 2012
TM-9-2330-342-10 - Page 416 of 500
Table
1.
OPERATOR'S PMCS - AFTER - Continued.
ITEM
NO.
INTERVAL
ITEM TO BE
CHECKED OR
SERVICED
PROCEDURE
EQUIPMENT
NOT READY/
AVAILABLE IF:
3
After
Drawbar Locking
Pin
Visually inspect drawbar
locking pin (Figure 1, Item 3)
and latch (Figure 1, Item 2) for
missing or broken parts.
Drawbar locking pin is
missing or locking latch
is missing or damaged.
4
After
Safety Chains
Visually inspect safety chains
(Figure 1, Item 6) for obvious
damage or missing parts.
Safety chains are
missing, have missing
parts or have damage
that impair operation.
5
After
Intervehicular
Power Cables
Visually inspect intervehicular
power cables (Figure 1, Item 7)
and load lock status line (Figure
1, Item 1) for obvious damage
or damaged pin connectors.
Intervehicular power
cables or load lock
status line is missing or
have damaged or
broken pin connectors
that would impair
operation.
6
After
Wheels and Tires
WARNING
While changing tires or
while performing tire
maintenance, stay out of
the trajectory as shown
by the area indicated.
Failure to comply may re-
sult in injury or death to
personnel.
NOTE
Trajectory area as shown
applies to all wheel/tire
assemblies.
Visually inspect tires (Figure 2,
Item 3) for cuts, gouges, cracks,
and foreign objects. Check for
missing valve stem caps
(Figure 2, Item 4).
Tires missing or
unserviceable.
TM 9-2330-342-10
0050
0050-2
Back to Top
