INSTALLATION - Continued
1
10
3
5
7
2
9
4
6
8
3
5
4
2
1
TIGHTENING SEQUENCE
TRAJECTORY
CHOCK BLOCK
BOTTLE JACK
Figure 2.
Tire Installation.
2.
Install ten lugnuts (Figure 2, Item 1) on wheel studs (Figure 2, Item 3). Tighten lugnuts
using tightening sequence shown.
WARNING
When returning axle to the ground, ensure personnel are out of the
trajectory as shown by the area indicated. Failure to comply may result
in injury or death to personnel.
3.
Lower and remove jack and chock block from axle (Figure 2, Item 4).
END OF TASK
FOLLOW-ON MAINTENANCE
1.
Stow defective tire on spare tire bracket. (WP
0055)
2.
Remove wheel chocks. (WP
0020)
3.
Report to Field Maintenance to torque lugnuts as soon as possible.
END OF TASK
END OF WORK PACKAGE
TM 9-2330-342-10
0056
0056-5/6 blank