INSTALLATION - Continued
7
6
5
4
3
2
AIR
AIR WRENCH
HOSE
1
Figure 11.
Spare Tire Installation.
5.
Install lift assembly (Figure 11, Item 3) on spare tire (Figure 11, Item 4).
CAUTION
Ensure studs are aligned with stud holes before positioning tire on
bracket. Failure to comply may cause damage to equipment.
6.
Turn rod assembly (Figure 11, Item 1) clockwise and raise spare tire (Figure 11, Item
4) and position until studs (Figure 11, Item 2) and stud holes (Figure 11, Item 5) are
aligned.
7.
Tighten winch bolt (Figure 11, Item 1) until spare tire (Figure 11, Item 4) contacts both
tire stops (Figure 11, Item 7).
8.
Ensure handle (Figure 12, Item 3) is in LOCKED position.
TM 9-2330-342-10
0055
0055-14