TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 197 of 1348

CONDITION/INDICATION

Is continuity measured across wire 1008B between diode assembly connector, terminal 7 and the rear junction

box?

DECISION

Yes - Replace diode assembly (WP

0059). Go to (Step 14 - Do taillights operate?) to verify problem is solved.

No - Go to (Step 13 - Can trailer main harness wire 1008B be repaired?).

STEP 13

Can trailer main harness wire 1008B be repaired?

WARNING

Remove all jewelry such as rings, ID tags, bracelets, etc. prior to working on or around vehicle.

Jewelry and tools can catch on equipment, contact positive electrical circuits, and cause a

direct short, severe burns, or electrical shock. Failure to comply may result in injury or death

to personnel.

NOTE

Wire is not repairable if damage cannot be visually located or if a prior repair has already

reduced length of wire. Wire is not repairable if after repair, wire is too short to reach its

connection point.

1.

Visually check if trailer main harness wire 1008B can be repaired.

TM 9-2330-342-23&P

0014

0014-13