TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 218 of 1348

3.

Connect button probe cable red and black leads together.

4.

Perform ICE Offset Test 91.

CONDITION/INDICATION

Does test equipment pass offset test?

DECISION

Yes - Go to (Step 4 - Is continuity measured across wire 1012B between diode assembly connector, terminal 9 and

the rear junction box?).

No - Test equipment failed offset. Contact your Supervisor.

STEP 4

Is continuity measured across wire 1012B between diode assembly connector, terminal 9 and the rear

junction box?

WARNING

Remove all jewelry such as rings, ID tags, bracelets, etc. prior to working on or around vehicle.

Jewelry and tools can catch on equipment, contact positive electrical circuits, and cause a

direct short, severe burns, or electrical shock. Failure to comply may result in injury or death

to personnel.

1.

Remove cover from rear junction box (WP

0058).

TM 9-2330-342-23&P

0017

0017-4