TM-9-2330-342-23-P

PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1

TECHNICAL MANUAL; FIELD MANUAL

OCTOBER 2012

TM-9-2330-342-23-P - Page 225 of 1348

CONDITION/INDICATION

Is continuity measured between 24 vdc cable connector, pin D and a known good ground?

DECISION

Yes - Go to (Step 3 - Is continuity measured between 24 vdc cable connector, pin L and a known good ground?).

No - Go to (Step 4 - Can 24 vdc cable be repaired?).

STEP 3

Is continuity measured between 24 vdc cable connector, pin L and a known good ground?

WARNING

Remove all jewelry such as rings, ID tags, bracelets, etc. prior to working on or around vehicle.

Jewelry and tools can catch on equipment, contact positive electrical circuits, and cause a

direct short, severe burns, or electrical shock. Failure to comply may result in injury or death

to personnel.

1.

Connect button probe cable red lead to 24 vdc (12 terminal) cable, trailer end connector, pin L.

CONNECTOR

MC15

J

A

N

H

K

B

F

M

C

L

E

D

PIN L

PIN D

Figure 3.

12 VDC Cable Connector.

2.

Connect button probe cable black lead to a known good ground on vehicle.

3.

Perform ICE Test 91.

4.

Meter should display a reading less than 200 ohms.

TM 9-2330-342-23&P

0018

0018-3