TM-9-2330-342-23-P
PALLETIZED LOAD SYSTEM TRAILER (PLST) M1076 A1
TECHNICAL MANUAL; FIELD MANUAL
OCTOBER 2012
TM-9-2330-342-23-P - Page 555 of 1348
LED COMPOSITE LIGHT HARNESS (LEFT SIDE) REPLACEMENT - Continued
1
2
3
Figure 54.
LED Composite Light Harness (Left Side) Installation.
14.
Install cover (Figure 54, Item 1) and preformed packing (Figure 54, Item 2) on rear junction box (Figure 54,
Item 3). Hand tighten firmly.
END OF TASK
LED COMPOSITE LIGHT HARNESS (RIGHT SIDE) REPLACEMENT
REMOVAL
NOTE
Tag and mark all wires prior to removal.
1.
Remove cover (Figure 55, Item 1) and preformed packing (Figure 55, Item 2) from rear junction box (Figure
55, Item 3). Discard preformed packing.
1
2
3
Figure 55.
LED Composite Light Harness (Right Side) Removal.
2.
Remove locknut (Figure 56, Item 4) and wire 1004C (Figure 56, Item 5) from terminal yellow (Figure 56, Item
2). Discard locknut.
TM 9-2330-342-23&P
0059
0059-37
Back to Top
