TM-9-2350-238-10

RECOVERY VEHICLE, FULL-TRACKED: LIGHT, ARMORED, M578

OPERATOR’S MANUAL

APRIL 1990

TM-9-2350-238-10 - Page 171 of 291

TM 9-2350-238-10

Table 3-1. TROUBLESHOOTING–CONTINUED

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

CAB, BOOM, AND WINCHES–CONTINUED

31. CAB WILL NOT TRAVERSE.

Step 1.

Check to see if traversing pressure selector valve (1 ) is in open position.

Push pressure selector valve in to close valve. Refer to page 2-90.

Step 2. Check to see if linkage to traversing foot pedal (2) is disconnected.

If disconnected, install linkage on foot pedal.

If cab still will not traverse, notify unit maintenance personnel.

32. BOOM WILL NOT RAISE OR LOWER.

Step 1.

Check to see if single boom block is released from hull.

Operate boom winch to pay out cable and disconnect single boom

block from front of vehicle.

3-24