TM-9-2350-238-10

RECOVERY VEHICLE, FULL-TRACKED: LIGHT, ARMORED, M578

OPERATOR’S MANUAL

APRIL 1990

TM-9-2350-238-10 - Page 173 of 291

TM 9-2350-238-10

Table 3-1. TROUBLESHOOTING –CONTINUED

MALFUNCTION

TEST OR INSPECTION

CORRECTIVE ACTION

CAB, BOOM, AND WINCHES–CONTINUED

34. TOW WINCH WILL NOT OPERATE.

Step 1.

Check to see if tow winch shift control ( 1 ) is in center (neutral) position.

Turn shift control clockwise to LO position.

Step 2. Check to see if tow winch brake pressure selector valve (2) is pulled out.

Push pressure selector valve knob in to close valve. If winch still will

not operate, notify unit maintenance personnel.

35. LEVEL WIND DOES NOT TRAVERSE CAB.

Check to see if MASTER switch and level wind switch are in ON position.

36. LEVEL WIND

Step 1.

Set MASTER switch and level wind switches to ON position. If level

wind still does not traverse cab, notify unit maintenance personnel.

TRAVERSES CAB IN ONLY ONE DIRECTION,

Check to see if any bell connectors are disconnected at level wind sensing

switches.

Connect bell connectors,

3-26