TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 1019 of 1364

TM 9-2350-238-20-1

4

Remove four self-locking nuts (5), four

machine screws (6), and DIESEL FUEL

ONLY identification plate (7) from hull.

NOTE

Step 5 is written for one suspension

lockout cylinder but applies to all

suspension lockout cylinders and the

two hydraulic cylinder assemblies.

5

Remove three drive screws (8) and

suspension lockout cylinder identification

plate (9).

6

Remove two drive screws (10) and

7

If damaged, remove HIGH NOISE LEVEL

ENGINE SHUTDOWN identification plate

instruction plate (12) from bulkhead.

(11) from driver’s compartment wall.

2-993