TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 1012 of 1364

TM 9-2350-238-20-1

2-171. MAINTENANCE OF SPADE HYDRAULIC CONTROL VALVES, LINES, AND

FITTINGS (CONT).

INSTALLATION

1

Install new preformed packing (1) and tube

reducer (2) on slip ring assembly (3).

2

Install metal tube assembly (4) on tube

reducer (2).

3

Install new preformed packing (5), flat

washer (6), new tube fitting locknut (7),

and tube tee (8) on direct linear valve (9).

4

Tighten tube fitting locknut (7).

5

Connect metal tube assembly (4) to tube

tee (8).

6

Install new preformed packing (10) and

tube nipple (11) to direct linear valve (9).

7

Install metal tube assembly (12) on tube

nipple (11).

8

Install new preformed packing (13), flat

washer (14), new tube fitting locknut (15),

and tube elbow (16) to direct linear valve

(9).

9

Tighten tube fitting locknut (15).

10

Install new preformed packing (17) and

tube nipple (18) to direct linear valve (9).

11

Install metal tube assembly (19) on tube

nipple (18).

12

Install metal tube assembly (20) on tube

elbow (16) and connect to tube tee (8).

2-986