TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 1200 of 1364

TM 9-2350-238-20-1

2-207. MAINTENANCE OF FIRE EXTINGUISHER RETAINING STRAP.

This task covers:

a.

Disassembly

b.

Inspection/Repair

c.

Reassembly

INITIAL SETUP

Materials/Parts

Equipment Conditions

Self-locking nut (4)

2-923 Access cover removed

References

TM 9-2350-238-24P-1

NOTE

Cylinder fire extinguisher is shown removed for clarity. Fire extinguisher retaining

straps can be repaired without removing the cylinder fire extinguisher.

1

Remove four self-locking nuts (1), four flat

washers (2), four machine bolts (3), and

two extinguisher bracket retaining straps

(4) .

2

Remove two headless straight pins (5)

and two extinguisher bracket retaining

bands (6).

1

Inspect for broken, damaged, or missing

parts.

2

Repair is by replacement of authorized

parts (TM 9-2350-238-24P-1).

NOTE

Replace headless straight pins only if

damaged.

1

Position two extinguisher bracket retaining

bands (6) on vehicle frame, and secure

with two headless straight pins (5).

2

Position two extinguisher bracket retaining

straps (4) on vehicle frame, and secure

with four machine bolts (3), four flat wash-

ers (2), and four new self-locking nuts (1).

2-1174