TM-9-2350-238-20-1
HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL
MAY 1994
TM-9-2350-238-20-1 - Page 1192 of 1364
TM 9-2350-238-20-1
2-204. MAINTENANCE OF FIXED FIRE EXTINGUISHER CONNECTING LINES AND
FITTINGS (CONT).
REMOVAL (CONT)
5
6
7
8
9
Never remove main valve head on
top of cylinder fire extinguisher.
Removal of main valve head can
cause serious injury to personnel.
Disconnect fire extinguisher valve (17) at
nut (18). Carefully lift valve straight up
and remove from left cylinder fire
extinguisher. Allow valve to hang from
cylinder release cable sling wire rope (19).
Disconnect left discharge tube (20) at nut
(21) .
Handle cylinder fire extinguisher with
care-do not drop.
Release two retaining straps (22) and
remove left cylinder fire extinguisher (16)
from vehicle.
Disconnect right discharge tube (23) at nut
(24).
Handle cylinder fire extinguisher with
care-do not drop.
Release two
remove right
retaining straps (25) and
cylinder fire extinguisher (26).
2-1166
Back to Top
