TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 1184 of 1364

TM 9-2350-238-20-1

2-203. MAINTENANCE OF FIXED FIRE EXTINGUISHER CONTROL SYSTEM (CONT).

REMOVAL (CONT)

8

9

NOTE

Jam nut is supplied with driver's

compartment pull cable control

assembly. Take care not to lose or

damage this part.

Remove jam nut (10) from driver’s

compartment pull cable control assembly

(3).

Remove two flat washers (14) from

driver's compartment pull cable control

assembly (3).

10

11

12

13

Cut and remove pull cable control handle antipilferage seal (15) from rear left fender pull cable

control assembly (4) and hexagon head capscrew (16).

Remove hexagon head capscrew (16) and Iockwasher (17) from rear left fender pull cable

control assembly (4).

NOTE

Jam nut is supplied with rear left fender pull cable control assembly. Take care not to

lose or damage this part.

Loosen and remove jam nut (18) from rear left fender pull cable control assembly (4).

Remove rear left fender pull cable control assembly (4) from vehicle.

2-1158