TM 9-2350-238-20-1
3
4
5
6
Handle fire extinguisher cylinders with
care-do not drop.
Place cylinder fire extinguisher (2) in
vehicle.
Secure cylinder fire extinguisher (2) with
two cylinder brackets (10).
Connect left cylinder to nipple metallic
bent tube (11) to fire extinguisher valve
and tighten tube coupling nut (12).
Connect left discharge tube (13) to
cylinder fire extinguisher (2) and tighten
fitting (14).
(1)
7
8
9
If jam nut is damaged
Install rear left fender pull
NOTE
or missing, replace rear left fender pull cable control assembly.
cable control assembly (15) in vehicle. Secure with jam nut (16).
Install new Iockwasher (17) and hexagon head capscrew (18).
Install antipilferage seal (19) on rear left fender pull cable control assembly (15).
2-1161