TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 1180 of 1364

TM 9-2350-238-20-1

2-202. MAINTENANCE OF SPEEDOMETER, TACHOMETER, AND RELATED PARTS

(CONT).

INSTALLATION (CONT)

NOTE

14

Install speedometer adapter (29) on

If Iockwasher or nut has been lost or

straight drive speedometer adapter (27),

damaged, replace entire speedometer

and tighten nut (30).

shaft adapter.

15

Connect nut (31) on end of speedometer

10

Install speedometer shaft adapter (21) in

flexible shaft assembly (32) to speed-

wall of driver’s compartment, and secure

with Iockwasher (22) and nut (23).

11

Connect nut (24) on end of speedometer

flexible shaft assembly (25) to mechanical

speedometer (17).

12

Connect nut (26) on end of speedometer

flexible shaft assembly (25) to speed-

ometer shaft adapter (21).

13

Install straight drive speedometer adapter

(27) on engine, and secure with four

capscrews (28).

ometer shaft adapter (21).

16

Install two loop clamps (33) on speed-

ometer flexible shaft assembly (32).

17

Connect nut (34) on end of speedometer

flexible shaft assembly (32) to speed-

ometer adapter (29).

18

Secure two loop clamps (33) with two

screws (35).

2-1154