TM 9-2350-238-20-1
2-201. MAINTENANCE OF ARCTIC TRACTION KIT (CONT).
•
•
•
•
NOTE
It is not necessary to remove track from vehicle to replace arctic track pad.
Remove one track at a time.
Select area large enough to allow vehicle to be driven or towed at least 5 vehicle
lengths.
Procedures are written for one track, but apply to both tracks.
1
Remove two self-locking nuts (1).
2
3
4
5
Keep personnel away from vehicle.
Personnel injury could result when
track falls away from idler wheel.
NOTE
Step 2 applies to the removal of the
track shoe link pin from the top of a
roadwheel.
Install impact wire adapter on track shoe
link pin (2). Attach slide puller to impact
wire adapter and remove track shoe link
pin (2) from track (3).
Using driftpin, drive out track shoe link pin
(2).
Slowly back vehicle until track is
completely lying on ground.
Back vehicle off track.
2-1146