TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 1179 of 1364

TM 9-2350-238-20-1

2

3

4

5

6

7

8

9

NOTE

If Iockwasher or nut has been lost or

damaged, replace entire tachometer

shaft adapter.

Install tachometer shaft adapter (5) in wall

of driver’s compartment, and secure with

Iockwasher (6) and nut (7).

Connect nut (8) on end of tachometer

flexible shaft assembly (9) to mechanical

tachometer (1).

Connect nut (10) on end of tachometer

flexible shaft assembly (9) to tachometer

shaft adapter (5).

Connect nut (11 ) on end of tachometer

flexible shaft assembly (12) to tachometer

shaft adapter (5).

Install two loop clamps (13) on tachometer

flexible shaft assembly (12).

Connect nut (14) on end of tachometer

flexible shaft assembly (12) to tachometer

drive (15).

Secure two loop clamps (13) with two

screws (16).

NOTE

If two Iockwashers and two nuts have

been lost or damaged, replace entire

mechanical speedometer.

Install mechanical speedometer (17) on

driver’s instrument panel. Install mounting

clamp (18), two Iockwashers (19), and two

nuts (20) on mechanical speedometer

(17).

2-1153