TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

  TM-9-2350-238-20-1 - Page 1171 of 1364

TM 9-2350-238-20-1
2-201. MAINTENANCE OF ARCTIC TRACTION KIT.
This task covers:
a.
Removal
d.
Reassembly
b.
Disassembly
e.
lnstallation/Adjustment
c.
Inspection/Repair
INITIAL SETUP
Tools and Special Tools
Equipment Conditions
Automotive maintenance and repair shop
2-942 Fender extension removed
equipment: organizational maintenance,
Jacks applied to track
common no. 1 (less power) (item 80,
Track tension decreased
appx B)
(TM 9-2350-238-10)
Breaker bar (3/4 in. drive)
Socket (15/16 in., 3/4 in. drive)
NOTE
Torque wrench (0 to 600 ft-lb)
Install one track before removing
Wire brush
the other.
Driftpin (item 4, appx G)
Normally, the right track has 76
Impact wire adapter (item 1, appx G)
track shoes and the left track has
Slide puller (item 18, appx G)
75 shoes. The number of track
Track connecting fixture (2) (item 6, appx
shoes may vary due to track wear.
G)
General Safety Instructions
Materials/Parts
Arctic traction parts kit
Corrosion preventive sealant (item 35,
appx C)
Keep personnel away from vehicle.
Personnel Required
Personnel injury could occur when
Two
track falls away from idler wheel.
References
TM 9-2350-238-10
TM 9-2350-238-24P-1
2-1145


Back to Top