TM 9-2350-238-20-1
NOTE
•
Procedures are written for one
track shoe pad, but apply to all
track shoe pads.
•
Step 1 applies to the removal of
the track shoe pad when the track
is installed on the vehicle.
1
Position track shoe (1) between drive hub
sprocket (2) and roadwheel (3).
2
If damaged, remove self-locking nut (4)
and track shoe pad (5) from shoe
assembly (6).
INSPECTION/REPAIR
1
Inspect for broken, damaged, or missing
parts.
2
Inspect track shoe pads for wear to or
below height of grouser lugs.
3
Inspect track shoe pads for chunks of
rubber gouged out of contact surfaces.
4
For disassembly of track, refer to page
2-873.
5
If installing arctic traction kit for the first
time, store old track shoe pads in a clean,
dry place.
6
Using a wire brush, clean and remove old
rubber from pad seating area on track
shoe.
7
Repair is by replacement of authorized
parts (TM 9-2350-238-24P-1) which do not
meet inspection criteria.
2-1147