TM 9-2350-238-20-1
2-199. MAINTENANCE OF CRANE WINDOW ASSEMBLY (CONT).
REASSEMBLY (CONT)
8
9
10
11
Install window assembly to windshield
assembly fastener (23), two flat washers
(24), two machine screws (25), and two
new self-locking nuts (26).
Install two window catch pads (27), four
new Iockwashers (28), and four machine
screws (29).
Install two window assembly to windshield
assembly cylinder fasteners (30), four new
Iockwashers (31), and four machine
screws (32).
Install cover assembly (33), window
assembly retaining strip (34), five new
Iockwashers (35), five hexagon head
capscrews (36), and five hexagon plain
nuts (37) on frame (4).
2-200. MAINTENANCE OF CRANE OPERATOR’S BASE ASSEMBLY.
This task covers:
a.
Disassembly
b.
Inspection/Repair
c.
Reassembly
INITIAL SETUP
Materials/Parts
Adhesive (item 5, appx C)
Dry cleaning solvent (item 16, appx C)
Flint abrasive paper (item 2, appx C)
Nonmetallic channel (figure D-11, appx D)
Seal (figure D-14, appx D)
Self-locking nut (16)
Tape strip (figure D-12, appx D)
Tape strip (figure D-13, appx D)
Equipment Conditions
2-1111 Crane operator's base assembly
removed
General Safety Instructions
Dry cleaning solvent (SD2) is toxic
and flammable. Wear protective
References
goggles and gloves and use only in a
TM 9-2350-238-24P-1
well-ventilated area.
2-1142