TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

  TM-9-2350-238-20-1 - Page 1159 of 1364

8
Remove
washers
9
Remove
washers
10
Remove
11
Remove
TM 9-2350-238-20-1
cotter pin (22), hinge to base pin assembly (23), three machine screws (24), three flat
(25), three self-locking nuts (26), and lower half of windshield to base butt hinge (27).
cotter pin (28), hinge to base pin assembly (29), two machine screws (30), two flat
(31), two self-locking nuts (32), and lower half of windshield to base butt hinge (33).
vehicular window (34) from base assembly (35).
three machine screws (36), three flat washers (37), three self-locking nuts (38), and
upper half of windshield to base butt hinge (39).
. .
12
Remove two machine screws (40), two flat washers (41), two self-locking nuts (42), and upper
half of windshield to base butt hinge (43).
13
Remove four hexagon head capscrews (44), four Iockwashers (45), and base assembly (35).
INSPECTION/REPAIR
1
Inspect for broken, damaged, or missing parts.
2
Crane window assembly is a repairable assembly. Refer to page 2-1138.
3
Windshield wiper motor is a repairable assembly. Notify direct support maintenance.
4
Vehicular window is a repairable assembly. Refer to page 2-1081.
5
Base assembly is a repairable assembly. Refer to page 2-1142.
6
Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).
2-1133


Back to Top