TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 1150 of 1364

TM 9-2350-238-20-1

2-196. MAINTENANCE OF CRANE OPERATOR’S ENCLOSURE KIT (CONT).

REMOVAL (CONT)

13

14

15

16

17

18

19

Peel back a portion of the operator's

cupola ring cushioning pad (19) and

withdraw circuit breaker to wiper motor

and defroster electrical lead assembly (13)

through the 1/2-in. (12.70-mm) in the

operator’s cupola ring cushioning pad (19).

Using sealant, fill the 1/2-in. (12.70-mm)

hole to prevent entry of moisture into the

cab.

Dry cleaning solvent (SD2) is toxic

and flammable. Wear protective

goggles and gloves and use only in

well-ventilated area.

Using dry cleaning solvent, remove

adhesive residue from cupola

(20).

Using liquid soap and water, clean

operator’s cupola ring cushioning pad (19).

Using adhesive, reseal operator’s cupola

ring cushioning pad (19).

Close vehicular window (7).

Pull down and hook base straps (3) on

two screws (4).

2-1124