TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 1144 of 1364

TM 9-2350-238-20-1

2-196. MAINTENANCE OF CRANE OPERATOR’S ENCLOSURE KIT (CONT).

INSTALLATION (CONT)

29

30

31

32

33

34

35

Support angle bracket (28) and remove

two hexagon head capscrews (29), two

lockwashers (30), and angle bracket from

bulkhead.

NOTE

Retain the circuit breaker to floodlight

switch electrical lead and 15-amp

circuit breaker for installation when

the crane operator's enclosure kit is

removed.

Disconnect circuit breaker to floodlight

switch electrical lead (31) from 15-amp

circuit breaker (32) and 24-volt toggle

switch (33).

Disconnect slipring to circuit breakers and

radio power disconnect branched wiring

harness (34) from 15-amp circuit breaker

(32) .

Remove two machine screws (35) and

15-amp circuit breaker (32) from angle

bracket (28).

Install 30-amp circuit breaker (36) and two

machine screws (35) on angle bracket

(28).

Connect circuit breaker to wiper motor and

defroster electrical lead assembly (37) to

30-amp circuit breaker (36) and 24-volt

toggle switch (33).

Connect slipring to circuit breakers and

radio power disconnect branched wiring

harness (34) to 30-amp circuit breaker

(36) .

2-1118