TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

  TM-9-2350-238-20-1 - Page 1141 of 1364

TM 9-2350-238-20-1
When crane operator’s enclosure kit
is removed, retain four hexagon head
capscrews and four lockwashers to
plug threaded holes and prevent
entry of moisture.
15
Carefully return hatch cover (14) to the
closed position.
16
If hatch cover (14) doesn’t close properly,
check for interference between crane
operator’s base assembly (7) and hatch
cover arms (24).
17
If necessary, mark area on hatch cover
arms (24) to be removed. Grind hatch
cover arms accordingly so hatch cover
(14) will close properly.
2-1115


Back to Top