TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 1133 of 1364

TM 9-2350-238-20-1

22

23

Remove fuel pump cover (55), screen

(56), and gasket (57) from fuel pump

housing (58).

For disassembly of wiring harness plug

connectors, refer to general maintenance,

page 2-371.

INSPECTION/REPAIR

1

2

3

4

Inspect for broken, damaged, or missing

parts.

If damaged or missing, replace wiring

harness marker bands. Etch or stamp

lead number on new marker bands.

For repair of wiring harness shell

connectors and cable terminals, refer to

general maintenance, page 2-371.

Cab hot air vehicular compartment heater

and electrical control box are repairable

1 For reassembly of wiring harness plug

connectors, refer to general maintenance,

page 2-371.

2 Install new gasket (1), new screen (2), and

fuel pump cover (3) in fuel pump housing

(4).

5

6

7

assemblies. Notify direct support

maintenance.

If fuel pump cover or fuel pump housing is

broken or damaged, repair is by

replacement of next higher assembly.

Electrical wire is a manufactured item.

Refer to appendix D.

Repair is by replacement of authorized

parts (TM 9-2350-238-24P-1 ) which do not

meet inspection criteria.

2-1107