TM 9-2350-238-20-1
REASSEMBLY
For reassembly of the wiring harness connectors, refer to general maintenance, page 2-371.
INSTALLATION
1
2
3
4
Failure to remove or disconnect the
batteries before removing or installing
any electrical harness or lead may
result in injury or damaged
equipment.
If removed, install exhaust extension
heater plate (1), four lockwashers (2), and
four machine bolts (3).
Install heater exhaust shield (4), two flat
washers (5), and two hexagon head
capscrews (6) to metallic tube assembly
(7) .
Install air deflector assembly (8) on deck.
Install heater assembly (9), six new
lockwashers (10), and six hexagon head
capscrews (11).
2-1101