TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 1119 of 1364

TM 9-2350-238-20-1

10

Connect cable terminal (17) of heating

14

Untag and connect plug connectors of

element to slave electrical lead (5) to

heating element to slave electrical lead (5),

personnel vehicular heater with assembled

overheat thermostat to relay branched

washer screw (18).

wiring harness (15), and relay to heating

element electrical lead (16) to oil reservoir

11

Install new heater assembly gasket (19).

heater assembly (20).

12

Install oil reservoir heater assembly (20) in

15

Wiring harnesses and leads are secured to

hydraulic oil reservoir.

the hull and components with loop clamps,

straps, clips, ground screws, etc. During

13

Install six packings with retainers (21) and

installation, make sure the wiring harness

six screws (22).

or lead is secure and all hardware is tight.

2-193. MAINTENANCE OF VEHICULAR PARTS KIT—BOOTS, PLUGS, TRAYS, AND

RELATED PARTS.

This task covers:

a.

Removal

b.

Inspection/Repair

c. Installation

INITIAL SETUP

Materials/Parts

References

LockWasher (10)

TM 9-2350-238-24P-1

Self-locking nut (2)

2-1093