TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 1117 of 1364

TM 9-2350-238-20-1

DISASSEMBL Y

For disassembly of wiring harness plug connectors, refer to general maintenance, page 2-371.

INSPECTION/REPAIR

1

Inspect for broken, damaged, or missing parts.

2

If damaged or missing, replace marker bands. Etch or stamp lead number on new band.

3

For repair of cable terminal, refer to general maintenance, page 2-371.

4

Electrical wire is a manufactured item, refer to appendix D.

5

Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

For reassembly of wiring harness plug connectors, refer to general maintenance, page 2-371.

INSTALLATION

1

2

3

Install slave receptacle connector (1) with

four new lockwashers (2) and four

machine bolts (3).

Install relay and disconnect to slave

receptacle special cable assembly (4) to

slave receptacle connector (1). Solder

lead to connector per TB SIG-222.

Install heating element to slave electrical

lead (5) to slave receptacle connector (1).

Solder lead to connector per TB SIG-222.

2-1091