TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

  TM-9-2350-238-20-1 - Page 1146 of 1364

TM 9-2350-238-20-1
2-196. MAINTENANCE OF CRANE OPERATOR'S ENCLOSURE KIT (CONT).
INSTALLATION (CONT)
39
Close vehicular window (12).
40
Pull down and hook two base straps (2)
on two screws (3).
41
Pull down and press the crane operator’s
window assembly cover assembly (40)
against the matching tape strip (25).
42
Install and tighten the webbing strap (41)
on the hatch torsion bar (42).
INSPECTION/REPAIR
1
For repair of the crane
2
For repair of the crane
3
For repair of the crane
4
For repair of the crane
operator’s enclosure electrical wiring, refer to page 2-1126.
operator’s enclosure, refer to page 2-1129.
window assembly, refer to page 2-1138.
operator's base assembly, refer to page 2-1142.
2-1120


Back to Top