TM-9-2350-238-20-1
HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL
MAY 1994
TM-9-2350-238-20-1 - Page 1194 of 1364
TM 9-2350-238-20-1
2-204. MAINTENANCE OF FIXED FIRE EXTINGUISHER CONNECTING LINES AND
FITTINGS (CONT).
INSTALLATION (CONT)
2
3
4
5
6
7
•
Handle cylinder fire extinguisher
with care-do not drop.
•
Never remove main valve head on
top of cylinder fire extinguisher.
Removal of main valve head can
cause serious injury to personnel.
Install right cylinder fire extinguisher (3) in
vehicle and secure with two retaining
straps (4).
Connect right discharge tube (5) to right
cylinder fire extinguisher (3) and tighten
nut (6).
Handle cylinder fire extinguisher with
care-do not drop.
Install left cylinder fire extinguisher (7) in
vehicle and secure with two retaining
straps (8).
Connect left discharge tube (9) to left
cylinder fire extinguisher (7) and tighten
nut (10).
Reset fire extinguisher valve handle (11)
and install safety pin (12), if removed.
Carefully install fire extinguisher valve
(13) .
2-1168
Back to Top
