TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 127 of 1364

TM 9-2350-238-20-1

Make sure MASTER switch is OFF before repairing

electrical circuits. Failure to observe this warning

could result in injury to personnel.

Step 7.

Disconnect wiring harness. Place red probe on pin K (lead 459) of

receptacle and ground black probe. Set MASTER switch ON. If

multimeter indicates no voltage, repair lead 459 from MASTER switch to

receptacle. Refer to page 2-371. If multimeter indicates about 24 volts

and problem still exists, troubleshoot master relay circuit, refer to page

2-102; and troubleshoot MASTER indicator warning light circuit, refer to

page 2-171. Set MASTER switch OFF. Connect wiring harness to

receptacle.

2-101