TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

  TM-9-2350-238-20-1 - Page 134 of 1364

TM 9-2350-238-20-1
2-12. ELECTRICAL CIRCUIT TROUBLESHOOTING (CONT).
Step 8.
Make sure MASTER switch is OFF before repairing
electrical circuits. Failure to observe this warning
could result in injury to personnel.
Disconnect lead 459A from circuit breaker. Place red probe in circuit
breaker terminal and ground black probe. Set MASTER switch ON. If
multimeter indicates no voltage, replace circuit breaker. Refer to page
2-590. If multimeter indicates about 24 volts, go to step 9. Set MASTER
switch OFF. Connect lead 459A to circuit breaker.
2-108


Back to Top