TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

  TM-9-2350-238-20-1 - Page 137 of 1364

TM 9-2350-238-20-1
Make sure MASTER switch is OFF before repairing
electrical circuits. Failure to observe this warning
could result in injury to personnel.
Step 2.
Place red probe on INST switch output terminal. Ground black probe. Set
MASTER and INST switches ON. If multimeter indicates no voltage,
replace INST switch. Refer to page 2-566. If multimeter indicates about
24 volts, go to step 3. Set MASTER and INST switches OFF. Connect
remaining lead 27 to INST switch.
2-111


Back to Top