TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 187 of 1364

TM 9-2350-238-20-1

Step 6.

Disconnect wiring harness from instrument (gage) panel. Place red probe

on pin B (lead 321) of receptacle. Ground black probe. Start engine and

run at 1000 to 1200 rpm. Check resistance and stop engine. If multimeter

indicates 4 to 9 ohms, repair lead 321 between plug and XMSN OIL

PRESS indicator. Refer to page 2-371. If multimeter indicates less than 4

ohms or more than 9 ohms, repair lead 321 between receptacle and

engine disconnect. Refer to page 2-371. Connect wiring harness to

instrument (gage) panel.

O. TRANSMISSION OIL TEMPERATURE INDICATOR CIRCUIT.

2-161