TM-9-2350-238-20-1
HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL
MAY 1994
TM-9-2350-238-20-1 - Page 209 of 1364
TM 9-2350-238-20-1
Step 7.
Disconnect wiring harness. Place jumper wire to pin L (lead 506) and
ground. Disconnect lead 506 at line disconnect. Place red probe in lead
506. Ground black probe. If multimeter indicates continuity, circuit is
operating normally. If multimeter indicates infinity, repair lead 506 between
receptacle and line disconnect. Refer to page 2-371. Remove jumper
wire. Connect wiring harness. Connect line disconnect.
2-183
Back to Top
