TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 201 of 1364

TM 9-2350-238-20-1

R. SUSPENSION LOCKED WARNING LIGHT CIRCUIT.

Step 1.

Remove lamp from SUSPENSION LOCKED warning light. Refer to page

2-580. Set MASTER switch ON. Place suspension lockout control valve

handle in locked position. Place oil pump motor switch in ON position.

Place red probe in socket. Ground black probe. If multimeter indicates

about 24 volts, replace lamp. If multimeter indicates no voltage, set

MASTER switch OFF, install lamp, and go to step 2.

2-175