TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 349 of 1364

TM 9-2350-238-20-1

Make sure MASTER switch is OFF before repairing

electrical circuits. Failure to observe this warning

could

result in injury to personnel.

Step

12.

Disconnect lead 344 from blower solenoid. Place red probe in lead 344.

Ground black probe. Set MASTER switch ON. Set AIR INTAKE FAN

switch ON. If multimeter indicates about 24 volts, go to step 13. If multim-

eter indicates no voltage, repair lead 344 between air intake fan and blower

solenoid. Refer to page 2-371. Set MASTER switch OFF. Set AIR lN-

TAKE FAN switch OFF. Connect lead.

2-323