TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 353 of 1364

TM 9-2350-238-20-1

Make sure MASTER switch is OFF before repairing

electrical circuits. Failure to observe this warning

could result in injury to personnel.

Step

4.

To access wiring harness, remove hull engine compartment deck assembly

lid. Refer to page 2-935. Disconnect wiring harness. Place red probe in

socket H (lead 400). Ground black probe. If multimeter indicates about 24

volts, go to step 5. If multimeter indicates no voltage, repair lead 400 be-

tween 20A circuit breaker and wiring harness disconnect. Refer to page

2-371. Connect wiring harness.

2-327