TM-9-2350-238-20-1
HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL
MAY 1994
TM-9-2350-238-20-1 - Page 38 of 1364
—
TM 9-2350-238-20-1
2-4. SERVICE UPON RECEIPT OF MATERIEL (CONT).
Table 2-1. SERVICE UPON RECEIPT—M578 RECOVERY VEHICLE (CONT)
LOCATION
Driver’s
Compart-
ment
Driver’s
Compart-
ment
ITEM
Fuel System
ACTION
To prime fuel system:
a.
b.
c.
Set MASTER and INST switches to ON.
Hold PUMP AND HEATER IGNITER
and PRIME ENGINE FUEL FILTERS
switches in ON for 1 minute.
Release PUMP AND HEATER IGNITER
and PRIME ENGINE FUEL FILTERS
switches and set MASTER and INST
switches to OFF.
Start and run engine until lubricant
preservative cleaner is out of combustion
chambers and engine is operating smoothly.
Immediately check for fuel and oil leaks.
Troubleshoot engine if it does not develop
full power in 5 minutes.
REMARKS
2-5. CHECKING UNPACKED EQUIPMENT.
a.
Inspect the equipment for damage incurred during shipment. If the equipment has been
damaged, report the damage on SF 364, Report of Discrepancy.
b.
Check the equipment against the packing slip to see if the shipment is complete. Report all
discrepancies in accordance with the instructions of DA PAM 738-750.
c.
Check to see whether the equipment has been modified.
2-12
Back to Top
