TM-9-2350-238-20-1
HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL
MAY 1994
TM-9-2350-238-20-1 - Page 399 of 1364
TM 9-2350-238-20-1
REASSEMBLY
1
2
3
4
5
6
7
8
Strip cable insulation to depth of solder
wells of socket contacts (1).
Slide nut (2) over cable (3).
Slide grommet (4) over cable leads (5).
Insert cable leads (5) into solder wells of
socket contacts (1) and solder.
Push insert (6) into shell assembly (7)
from rear until seated. Groove (8) in
insert (6) must be aligned with guide in
shell assembly (7) to ensure proper fit.
Push socket contacts (1) into insert (6)
from rear until seated.
Push grommet (4) down cable leads (5)
and over solder wells of socket contacts
(1).
Screw nut (2) onto shell assembly (7).
2-17. TYPICAL MALE-TYPE PANEL MOUNTING RECEPTACLE CONNECTOR.
DISASSEMBLY
1
Unscrew nut (1) from shell assembly (2)
and slide back on cable (3).
2
Push grommet (4) back on cable leads
(5).
3
Drive pin contacts (6) out through rear of
insert (7) with pin extractor.
4
Push insert (7) out through rear of shell
assembly (2).
5
Unsolder cable leads (5) from pin contacts
(6).
2-373
Back to Top
