TM-9-2350-238-20-1
HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL
MAY 1994
TM-9-2350-238-20-1 - Page 402 of 1364
TM 9-2350-238-20-1
2-19. TYPICAL MALE-TYPE PLUG CONNECTOR (CONT).
REASSEMBLY
1
2
3
4
5
6
7
8
9
Strip cable of insulation equal to depth of
solder wells of pin contacts (1).
Slide nut (2) over cable (3).
Slide grommet (4) over cable leads (5).
Insert cable leads (5) into solder wells of
pin contacts (1) and solder.
Push insert (6) into shell assembly (7)
from rear until seated. Groove (8) in
insert (6) must be aligned with guide in
shell assembly (7) to ensure proper fit.
Push pin contacts (1) into insert (6) from
rear until seated.
Slide coupling (9) onto shell assembly (7).
Push grommet (4) down cable leads (5) and over solder wells of pin contacts (1).
Screw nut (2) onto shell assembly (7).
2-20. REPLACING CABLE TERMINALS AND SHELL CONNECTORS.
CABLE TERMINALS
1
2
3
4
Strip cable insulation equal to depth of
terminal well (1).
Slide insulator (2) over cable (3).
Insert cable (3) into terminal well (1) and
crimp.
Slide insulator (2) over crimped end of
terminal (4).
2-376
Back to Top
