TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

  TM-9-2350-238-20-1 - Page 567 of 1364

TM 9-2350-238-20-1
1
2
Install detector mounting and engine lifting
plate (1) on engine, and secure with
retained screws. Torque screws, refer to
appendix E.
Position rate of flow control (2) on detector
mounting and engine lifting plate (1).
Secure with three new Iockwashers (3)
and three hexagon head capscrews (4).
3
4
5
6
Install pipe to tube elbow (5) to rate of
flow control (2).
Connect metal tube assembly (6) to pipe
to tube elbow (5).
Install loop clamp (7) to metal tube
assembly (6).
Install tube support angle bracket (8).
Secure with hexagon head capscrew (9),
new Iockwasher (10), hexagon plain nut
(11), new Iockwasher (12), and hexagon
head capscrew (13).
7
8
9
Install pipe straight adapter (14) to metal
tube assembly (15).
Install pipe to tube elbow (16) to rate of
flow control (2).
Install metal tube assembly (15), loop
clamp (17), hexagon head capscrew (18),
tube support angle bracket (19), new
lockwasher (20), and hexagon plain nut
(21).
2-541


Back to Top