TM 9-2350-238-20-1
1
Loosen four hose clamps (1) and two nonmetallic hoses (2) securing water crossover tube (3)
to engine water outlet (4) and flange to tube elbow (5).
2
Slide hose clamps (1) and nonmetallic hoses (2) onto water crossover tube (3). Remove water
crossover tube.
3
Remove hose clamps (1) and nonmetallic hoses (2) from water crossover tube (3).
4
Remove machine bolt (6), flat washer (7), Iockwasher (8), and hexagon plain nut (9) securing
loop clamp (10) to angle bracket (11).
5
Loosen four hose clamps (12) and two nonmetallic hoses (13) securing water by-pass loop (14)
to thermostat cover (15) and water pump (16).
6
Slide hose clamps (12) and nonmetallic hoses (13) onto water by-pass tube (14). Remove
water by-pass tube.
7
Remove hose clamps (12) and nonmetallic hoses (13) from water by-pass tube (14).
8
Remove pipe plug (17) and pipe plug (18).
2-537