TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 553 of 1364

TM 9-2350-238-20-1

1

Remove six machine screws (12) and three retaining plates (13) from hull deck support beam

(14).

2

Remove two spring pins (15), two radiator filler cover pins (16), two helical springs (17), and

four flat washers (18).

3

Remove six machine screws (19), six self-locking nuts (20), two radiator filler cap covers (21)

from hull deck support beam (14).

4

Remove two nonmetallic seals (22) from hull deck support beam (14).

1

Inspect for broken, damaged, or missing parts.

2

Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

1

Apply adhesive

beam (14).

to two new nonmetallic seals (22). Install nonmetallic seals to hull deck support

2

Install two radiator filler cap covers (21) to hull deck support beam (14), and secure with six

machine screws (19) and six new self-locking nuts (20).

3

Install four flat washers (18), two helical springs (17), two radiator filler cover pins (16), and two

new spring pins (15).

4

Install three retaining plates (13) to underside of hull deck support beam (14), and secure with

six machine screws (12).

1

Install radiator beam assembly (5).

2

Install ten flat washers (11), ten new Iockwashers (10), and ten hexagon head capscrews (9).

Torque hexagon head capscrews to 21 to 23 ft-lb (28 to 31 N-m).

3

Install two flat washers (8), two new Iockwashers (7), and two machine screws (6).

4

Install cushioned loop clamp (3) around engine coolant elbow (4). Secure to radiator beam

assembly (5) with new lockwasher (2) and machine screw (1).

2-527