TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 551 of 1364

TM 9-2350-238-20-1

15

16

17

18

19

20

21

22

23

Slide hose (35) with two hose clamps (36) onto radiator pressure equalizing metallic tube (6) so

that hose is evenly positioned on the radiator to surge tank metal tube assembly (5) and

radiator pressure equalizing metallic tube. Tighten hose clamps.

Install preformed hose (37) with two hose clamps (38) and tighten hose clamps.

Install preformed hose (39) with two hose clamps (40) and tighten hose clamps.

Install preformed hose (41) with two hose clamps (42) and tighten hose clamps.

Install nonmetallic hose (43) with two hose clamps (44) and tighten hose clamps.

Install radiator support beam. Refer to page 2-525.

Install hull engine compartment deck assembly lid. Refer to page 2-935.

Fill cooling system. Refer to TM 9-2350-238-10.

Run engine long enough to check for leaks. If leaks exist, check that all parts are correctly

installed. If leaks still exist, inspect for defective parts.

2-60. MAINTENANCE OF RADIATOR SUPPORT BEAM AND RELATED PARTS.

This task covers:

a.

Removal

b.

Disassembly

c.

Inspection/Repair

d.

Reassembly

e.

Installation

INITIAL SETUP

Tools and Special Tools

Automotive maintenance and repair shop

equipment:

organizational maintenance,

common no. 1(less power) (item 80,

appx B)

• Torque wrench (0 to 170 ft-lb)

Nonmetallic seal (2)

Self-locking nut (6)

Spring pin (2)

References

TM 9-23350-238-24P-1

Materials/Parts

Adhesive (item 4, appx C)

Lockwasher

Lockwasher (2)

Lockwasher (10)

Equipment Conditions

2-935

Hull engine compartment deck

assembly lid removed

2-525