TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 541 of 1364

TM 9-2350-238-20-1

1

inspect for broken, damaged, or missing parts.

2

Repair is by replacement of authorized parts (TM 9-2350-238-24P-1).

1

Install exhaust elbow (4), swing check valve (5), and coupling clamp (3).

2

Connect coupling clamp T-bolt (2) to coupling clamp (3).

3

Tighten nut (1) on coupling clamp T-bolt (2).

2-59. MAINTENANCE OF RADIATOR AND RELATED PARTS.

This task covers:

a.

Remova l

c. Cleaning

b.

Inspection/Repair

d.

Installation

INITIAL SETUP

Tools and Special Tools

Automotive maintenance and repair shop

equipment: organizational maintenance,

common no. 1 (less power) (item 80,

appx B)

●

Torque wrench (0 to 170 ft-lb)

●

Wire brush

Hoist

Sling

Materials/Parts

Adhesive (item 4, appx C)

Dry cleaning solvent (item 16, appx C)

Emery cloth (item 11, appx C)

Hose (figure D-4, appx D)

Hose (figure D-4, appx D)

Lockwasher (18)

Lockwasher(12)

Lockwasher (6)

Packings with retainer (8)

Radiator bulkhead rubber strip (4)

Radiator bulkhead seal (4)

Radiator drain gasket (2)

Radiator tube assembly gasket (2)

References

TM 9-2350-238-10

TM 9-2350-238-24P-1

TM 750-254

Equipment Conditions

Cooling system drained

(TM 9-2350-238-10)

2-935 Hull engine compartment deck

assembly lid removed

2-525 Radiator support beam removed

2-515