TM-9-2350-238-20-1

HULL AND RELATED COMPONENTS RECOVERY VEHICLE, FULL TRACKED: LIGHT, ARMORED, M578

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL

MAY 1994

TM-9-2350-238-20-1 - Page 534 of 1364

TM 9-2350-238-20-1

2-56.

MAINTENANCE OF THROTTLE AND ACCELERATOR CONTROLS AND

LINKAGE (ENGINE COMPARTMENT) (CONT).

1

Turnoff engine.

8

Disconnect helical spring (7) from trans-

mission and governor linkage bell crank

2

Block tracks.

(8) .

Brake foot pedal is spring-loaded.

Before working in forward area of

driver's compartment, ensure vehicle

tracks are blocked and parking brake

is released.

3

Release foot pedal.

4

Push throttle control (1) in.

5

Remove cotter pin (2) and pin (3).

6

Remove clevis (4).

7

Remove cotter pin (5) and headed straight

pin (6).

9

Position rigid connecting link (9) away from

transmission and governor linkage bell

crank (8).

10

Remove hexagon plain nut (10),

Iockwasher (11), and hexagon head

capscrew (12) from rod assembly (13) and

transmission and governor linkage bell

crank (8).

11

Position rod assembly (13) away from

transmission and governor linkage bell

crank (8).

12

Adjust foot rigid connecting link rod ends

(14) to position vertical arm of throttle

linkage bell crank (15) parallel to bulkhead.

2-508